Manual Rotator and Tilter Vacuum Lifter (below the hook)

With three frame configurations, 90° tilt and continuous 360° rotation, these Powr-Grip® vacuum lifters deliver maximum versatility and range of motion in the shop or at the construction site.

Standard Vacuum Pad Spread:
MRT411LDC
   28-1/4" x 32-3/4" [717 x 834 mm] (basic configuration)
   48-1/4" x 67-1/2" [1227 x 1716 mm] (extended configuration)
   78-1/4" x 15-3/4" [1988 x 402 mm] (linear configuration)
MRT49DC
   subtract 2-3/4" [73 mm] from each dimension listed above
MRT4HV11DC
   subtract 1" [25 mm] from each dimension listed above

Number / Size of Vacuum Pads:
MRT411LDC - 4 / 11" [28 cm] dia. lipped vacuum pads
MRT49DC - 4 / 9" [23 cm] diameter vacuum pads
MRT4HV11DC - 4 / 10" [25 cm] dia. lipped vacuum pads

Load Capacity*:
MRT411LDC - 700 lbs [320 kg]
MRT49DC - 500 lbs [225 kg]
MRT4HV11DC - 600 lbs [270 kg]
(*On smooth, nonporous surfaces. Please contact us for recommendations on other surfaces.)

Average Weight of Vacuum Lifter:
122 lbs [56 kg]
Standard Operating Power:
12 volts DC, 10 amps

Load Movement:
Manual rotation, 360° edgewise, with locking at each quarter point
Manual tilt, 90° between upright and flat, with automatic latching in upright position

Standard Features:
Low vacuum warning light
On-board battery and charger
Battery energy gauge
Vacuum gauge
Vacuum line filter
Vacuum reserve tank
Spring-mounted vacuum pads
Movable vacuum pad mounts
Vacuum pad extension arms

Available Options:
Dual vacuum system (EO10DVS)
Forklift adapter (LB7FAO)
Adaptable length lift bar (LB6ALO)
Long extension arms (CF5LEAO)
Individual vacuum pad shutoffs (CM1COWB)
Extensions for movable pad mounts (CM6MEVL)
Closed cell foam vacuum pad rings (FRHV11)
   (MRT4HV11FDCO lifters only)
Cladding pad frame extensions (CF13CEO)
MRT/MRTA Shipping case (53006)
Alternative vacuum pad materials, including low-marking, temperature resistant
   and chemical resistant compounds

Design Standards:
ASME B30.20-2006
   (BTH-1 Design Category "B", Service Class "0")
CE
AS 4991-2004